Technical parameters of 240L garbage bin

■ Garbage bin body

High density polyethylene 100% new material is used for one-time injection molding without seams, with a smooth surface and easy cleaning. The performance of the barrel body is produced according to the EN840-5 standard, and the average wall thickness of the barrel body reaches 5.0mm or more.

It is a domestic initiative to add patented reinforced ribs to the unique design of the front and back of the barrel, allowing the edges of the barrel to withstand sufficient mechanical strength and greater impact force.

The inside of the skirt of the garbage bin lifting area is equipped with mesh double-sided reinforcing ribs, and a special hook is designed with a slanted edge to ensure a tight connection between the plastic bin and the flipping rack (rear pressure car supporting device) during the connection operation.

Side reinforcement ribs

The newly added reinforced ribs on the side of the bucket body prevent damage to the garbage bin during transportation and facilitate transportation turnover.

■ lid

There is a professional odor proof sealing ring inside the barrel lid, which enhances sealing and better prevents the leakage of garbage odor.

■ handle

There are four reinforcing ribs connecting the barrel lid and barrel body, which are firm at the connection point, increasing the impact resistance of the barrel handle, improving the protection of the handle, and extending its service life.; There are 4 connecting pins between the barrel cover and the barrel body.

Special anti slip design is installed at the handle for a more user-friendly use

.

Pins

The pin is made of 100% ABS raw material and is injection molded in one go. It is high-strength, sturdy, and durable. The pin is fastened with air nails, making it more tightly connected to the barrel without falling off. It can move freely and can be opened and closed more than 100000 times, and has anti-theft function; The handle, which adopts special techniques and undergoes fine processing with a frosted feel, has a more humanized design.

■ Anti slip foot stepping device

Below the back of the bucket, a more user-friendly anti slip foot stepping device is designed, allowing staff to easily transport the garbage bin even when it is full.

■ Barrel edge mouth

The latest double skirt design is adopted for the edge of the garbage bin, and there are mesh reinforcement ribs inside the skirt of the garbage bin. The reinforced edge of the garbage bin has sufficient mechanical strength when lifting the frame, and users can also choose to install intelligent identity recognition cards in the reserved position for electronic management, thereby improving the degree of management.

■ Wear resistant nails

Based on years of customer experience in usage, our company has created a unique wear-resistant design for the bucket bottom. During the injection molding production process, 12 wear-resistant nails are embedded at the front and bottom of the bucket bottom, which have the characteristics of wear resistance, weather resistance, corrosion resistance, etc. The use of galvanized steel is rust proof and wear-resistant, preventing bucket bottom wear during use and extending the product's service life; At the same time, according to customer needs, wear-resistant rubber pads are added, which use high-quality natural rubber to enhance the overall wear resistance of the garbage bin and extend its service life.

■ Reinforcement ribs at the bottom of the bucket

The bottom outer side of the bucket has a sturdy and reliable anti wear structure design, which is integrated with the garbage bin by injection molding, without the need for post-processing; The bottom of the bucket can be marked with the name, phone number, and year of manufacture of the production enterprise.

Features：The outer surface of the wheel is smooth and easy to clean; Add reinforcing ribs on the inner surface of the wheel, with each reinforcing rib and the wheel being moderately chamfered to increase structural durability.

■ Rubber wheels

The tires are made of natural rubber produced in tropical regions and manufactured according to technical standards equivalent to producing automotive tires; The wheel disc is made of 100% imported high-density polyethylene (HDPE) raw material through one-time injection molding. Fixed moving wheels will not be stolen or unloaded, and the rubber hardness test reaches 60 ± 5 to ensure smooth operation during the cleaning process and facilitate cleaning. The center of the wheel disc is made of nested alloy casting, which is molded in one injection molding. It has low coaxial friction coefficient and is not easy to wear, making the wheel rotate flexibly.

■ Spring buckle

The wheels adopt a spring buckle anti-theft mode, and the inner ring is made of polyethylene with alloy pins for easy installation and disassembly

.

■ Solid axis

This wheel axle is made of solid steel with a diameter of 22 and has undergone anti-corrosion treatment. It is cut at both ends to form grooves, and the oxidized surface is thoroughly removed through three rounds of acid washing. The steel wheel axle is made by a special electroplating process. Durable, resistant to oxidation and rust.

Rubber wheel and bottom shaft connection: plug-in locking fixed anti-theft connection.